Zeekr X ABS Light On? Here's What to Check (and If You Can Drive)

Why the ABS Light Stays On

The ABS (anti-lock braking system) light on your Zeekr X is designed to warn you when the system detects a problem. When it stays on continuously, the most common cause is a faulty or dirty wheel speed sensor. These sensors sit behind each wheel and measure how fast that wheel is rotating. The ABS control module uses this data to prevent wheel lock-up during hard braking. If any sensor stops sending a signal, or sends an erratic one, the module turns on the warning light and often disables ABS as a safety measure.

Which Sensors and Parts to Check First

Start by checking the wheel speed sensors and their wiring. Here's the order I recommend:

• Inspect all four sensors visually – Look for obvious damage, corrosion, or debris stuck to the magnetic tip. A quick cleaning with a cloth and brake cleaner can sometimes fix the issue.
• Check the sensor wiring and connectors – Especially near the wheel wells and suspension area. Look for frayed wires, broken clips, or loose plugs that might have been hit by road debris.
• Monitor live data with a scan tool – Most OBD2 scanners or Zeekr's diagnostic software can show the speed reading from each wheel. Compare them while rolling slowly. A wheel that reads zero or jumps erratically is your culprit.
• Consider the front vs. rear sensors – On the Zeekr X, the rear sensors are often more exposed to water and dirt, so check those first if you've been driving in wet or muddy conditions.

Is It Safe to Keep Driving?

You can generally keep driving for short trips, but with caution. The ABS light being on means your anti-lock braking system is likely inactive, so in an emergency stop, your wheels may lock up and you could lose steering control. The regular hydraulic brakes will still work normally, so you won't be left without braking power. However, I strongly recommend getting the sensor diagnosed and replaced as soon as possible. If the ABS light is accompanied by the traction control light or the brake warning light, stop driving immediately and call for assistance – that combination often indicates a more serious brake system fault.

In my experience, a failing wheel speed sensor is a straightforward and affordable fix. Replacing it will typically restore your ABS and make your daily driving safer. The good news is that the Zeekr X uses standard sensors, and most independent shops that work with modern EVs can handle the job. but if you're still under warranty, don't hesitate to book a visit to your Zeekr dealer.

This material is AI-generated and for informational purposes only — it does not replace an in-person diagnosis by a qualified mechanic.