Zeekr 008 ABS Light Stays On: Wheel Speed Sensor Guide

When your Zeekr 008's ABS warning light stays on continuously, it's a signal that the anti-lock braking system has detected a problem — and in the vast majority of cases, the culprit is a wheel speed sensor or its associated wiring. The good news is that your normal brakes will still work, but we need to figure out what's causing the fault before you rely on the system in an emergency.

What Usually Causes a Continuous ABS Light

On most Zeekr 008 models, each wheel has an individual speed sensor that sends data to the ABS controller. Common failure points include:

• A failed or contaminated wheel speed sensor – this is the most frequent cause, often due to water, dirt, or wear.
• Damaged or corroded sensor wiring or connector, especially after rough roads or winter salt.
• A dirty, bent, or chipped tone ring (the toothed ring the sensor reads).
• An incorrect sensor gap after recent brake or bearing work.

Which Parts to Check First

Start with an OBD/ABS diagnostic scan to identify which wheel sensor is triggering the fault. Then, inspect that sensor and its connector for visible damage, moisture, or corrosion. Use a multimeter to check the sensor's resistance or AC output if you have the specs for your model. In most cases, the wheel speed sensor is a separate, replaceable part — so replacing just the sensor is usually enough. However, on some trims the sensor is integrated into the hub bearing, so confirm the exact layout for your specific Zeekr 008 year before buying parts. Replacing the entire hub bearing acts as a fallback when the sensor cannot be serviced separately.

Is It Safe to Keep Driving?

You can usually drive short distances in normal conditions, but understand that ABS, traction control, and stability control may be disabled. In an emergency stop or on slippery pavement, the wheels could lock up, so keep a longer following distance and avoid sudden braking. Have the system diagnosed as soon as possible — driving with the ABS warning light constantly on for a long time can lead to other issues, and in some cases the warning could hide a more serious brake fault. Treat it as a reason to take a quick look, not a reason to panic.

This material is AI-generated and for informational purposes only — it does not replace an in-person diagnosis by a qualified mechanic.