ABS Light Stays On? Honda Odyssey V Wheel Speed Sensor Guide

If the ABS light on your Honda Odyssey V stays on continuously, it's your van's way of saying the anti-lock braking system has detected a problem. On this generation, that problem is very often a wheel speed sensor, not a brake failure.

What to check first

Wheel speed sensors are mounted at each wheel hub and read a toothed tone ring. They can be covered in grime, corroded, or damaged by road debris. Start by scanning the OBD-II port for ABS trouble codes — the code will tell you which corner is affected. Then inspect the sensor wiring and connector, and remove the sensor to check the tip for metal debris.

• Damaged wiring or loose connector
• Corroded sensor terminal
• Defective wheel speed sensor
• Dirty or broken tone ring
• Failing ABS module (less common)

Is it safe to keep driving?

Generally yes — the ABS light means the ABS is disabled, but your basic brakes still work. However, if the red brake warning light is also glowing, or the pedal feels soft, have the van towed. When the ABS is off, traction control may be off too, so reduce speed and leave extra room on wet roads.

This material is AI-generated and for informational purposes only — it does not replace an in-person diagnosis by a qualified mechanic.